Model£ºLCBT-18¡«72A(B)
Filtration area£º18m2¡«72m2
air volume£º1080m3/h¡«8640m3/h
- Cancel
the blowing pipe and venturi device on the top of
the bag, to make the resistance lower and easy to
erect, maintain bag.
- Adopt
new side jet technology for one chamber, one pulse
valve can jet 18M2, which can reduce almost two-thirds
pulse valve
- Only
need 80-150Pa low pressure blowing to realize perfect
dust cleaning, adopt low pressure straight valve
structure, which the wear ¨Cout part¡¯s life can be
more than 1 year.
- The
inlet density can not more than 30g/Nm3,, and when the air cloth
ratio is less than 2m/min, the pressure drop is less than 1100Pa,
which can replace the secondary dedusting.
- Combine
the bag filter with the fan, to reduce the manufacture
and installation of the inlet & outlet, and
reduce the air leakage coefficient & pressure
resistance. Which can be used on the spot and easy
to operate.
- A small air pump is equipped with the mainframe, which
can solve all troubles in the air source pipe design
and erection. And it is very easy to operate and
install.
- The flat bag structure is adopted, which enlarge unit filtration
area greatly and improve unit volume handling, to
reduce the cost and save the energy consumption,
meanwhile, the bag installation and replacement
can be done at the side of bag filter, and with
no any height limited..
- Widely used in dust cleaning and recycling in build material
industry, foundry industry , chemical industry,
machinery industry, mine excavating, grain processing
etc.
|
